Filter
Top Products
FOR REPLACEMENT FILTER INFORMATION
for Model EP722
GETTING TO KNOW YOUR VACUUM
Call: 1-866-98SHARK (1-866-987-4275)
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or
visit our website: www.sharkvac.com
Replacement HEPA filter SKU# XSH722
FOR TECHNICAL SUPPORT
for Model EP722
In U.S.: 1 (866) 805-6850
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The HEPA Dust Cup Filter may be washed. We recommend that this be done once a
month or when suction appears reduced .
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange, flange side
up and rinse under water. When finished, shake off excess water. Do NOT wash in
dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to air dry
COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT DRY
IN DRYER.
IMPORTANT
: Both the Pre-Motor and the Micro Exhaust filters should be replaced
every 6 months or sooner if required.
All filters should be checked regularly for signs of damage, preferable after each
cleaning task. The filters must be replaced immediately if they become damaged.
Always disconnect the vacuum from the electrical outlet when checking the filters.
1. Hose
2. Cord Rewind Button
3. Power On/off Button
4. Handle
5. Dust Cup
6. Air Intake Duct
7. Air Driven Turbo Brush
8. Dust Cup Handle
9. Telescopic Tube
10.Floor to Carpet Brush
11.Hand Held Air Driven Turbo Brush
12.Upholstery Brush
13.Dusting Brush
14.Crevice Tool
15.Shoulder Strap
Important:
This vacuum cleaner is equipped with a motor protective thermostat. If for some
reason your vacuum overheats, the thermostat will automatically turn the unit off.
Should this occur, unplug the vacuum from the wall outlet and turn off the switch.
Empty the dust cup, "TapClean" the dust cup filter and check for blockages in hose
and suction inlet. Allow the unit to cool for a minimum of 45 minimum prior to restarting
the unit. To restart, re-plug the vacuum into the wall socket and turn the switch back
on.
Technical Specifications
Voltage: 120V., 60Hz.
Power: 10.8 Amps, 1300 Watts
2
9