Filter
Top Products
Assembling the Vacuum Cleaner
1. Slide the narrow end of one of the extension tubes inside the deluxe, automatic floor to
carpet attachment. Then connect second tube to the first tube.
2. Connect the curved hose/wand extension to the connected two tubes.
3. Connect the hose clamp to the main unit by squeezing on hose clamp locking switches and
pushing in until locked into position.
Using Deluxe Floor Attachment
Please note that the convenient 3-way adjustability and 6 soft rubber wheels on the deluxe,
automatic floor to carpet nozzle enable you to freely move forward and reverse from carpet to
floor without any adjustments.
If floor nozzle does not move easily, we suggest that you reduce suction power on the variable
suction control. (See below.)
Suggestion: After vacuuming with deluxe floor nozzle, use crevice tool to clean the deluxe,
automatic floor to carpet nozzle.
3