Filter
Top Products
8
E
J
D
J
E
I
ENGLISH
HOW TO USE
CAUTION: Moving parts, make sure power switch E is in the
OFF position before plugging into electrical outlet.
Power Switch (Fig. 2)
Step 1: Features a 3-position switch E . The “Off” setting turns
the cleaner off. The “Floors” setting is suction only and
the “Carpet” setting is suction and brushroll.
To Clean Bare Floors and Rugs (Fig. 2)
Note: Experiment with your hard floor surface, sometimes
it is best to have the brushroll turning. (Switch in the
“carpet” position).
Step 1: Push the handle button J to release the lock and slide
handle C and D up until fully extended. The handle will
lock in place.
Step 2: Unwrap the electrical cord K and plug into an
appropriate outlet.
Step 3: Push power switch E to floor setting to clean bare floors.
Use the carpet setting for carpets or rugs.
To Clean Stairs (Fig. 3)
Step 1: Push the handle button J to release the lock and slide
handle C and D down until fully collapsed. The handle
will lock in place.
Step 2: Unwrap the electrical cord K and plug into an
appropriate outlet.
Step 3: Push the power switch E to floor setting to clean bare
floors. Use the carpet setting for carpets or rugs.
Step 4: It may be beneficial to use the stair cleaning grip I while
cleaning stairs.
FIG. 2
FIG. 3