Filter
Top Products
12
ENGLISH
M
A
PUSH TO OPEN
N
Brushroll
Note: Turn off the power switch E and unplug the electrical
cord K before inspecting brushroll.
Long hair, thread, string, etc. can wrap around the revolving brush-
roll and result in reduced performance.
To check brushroll for debris turn cleaner nozzle over and inspect
for wrapped matter. Use scissors to cut debris from brushroll.
How to Check for Blockages
Note: Turn off switch and unplug the electrical cord before
checking for blockages.
If suction performance diminishes, check for blockages in suction
path.
Step 1: Remove dust cup G and set aside.
Step 2: Inspect for blockages inside hole area M at base of body
A opening. Use tool or coat hanger to remove blockage
(Fig. 8).
Step 3: Reinstall dust cup G .
Step 4: Flip vacuum over and inspect dirt channel in brushroll
area. Open access door by pulling back on access door
latch N and lifting up (Fig. 9), check for blockage.
Remove any blockages with tool or coat hanger. Close
access door.
FIG. 8
FIG. 9