Eureka CV200 Vacuum Cleaner User Manual


 
8
Brush Roll
The rotating brush roll sweeps and combs the carpet nap. Keep the brush roll free
from hair and threads so it will continue brushing the carpet nap. When the bristles
no longer touch a piece of cardboard held across the bottom plate, the brush roll
should be serviced by an Authorized Warranty Service (refer to Service Information in
the front of this booklet).
Cleaner Care
NOTE: Disconnect power cord from electrical outlet before cleaning unit.
To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a
mild soap solution, then thoroughly dried. Never use any type of chemical as
chemicals can damage the cleaner.
Storage
The cleaner should be stored in a clean, dry place with the Power-Touch handle
removed from the wands.
Carpet Cleaning Adjustment
The brush height is instantly and automatically adjusted to any carpet pile length.
The floating head feature of your motorized nozzle allows the brush to float evenly
and parallel to all carpet pile surfaces without manual adjustment.
Edge Kleener
®
Edge Kleener
®
feature provides for improved cleaning of carpets near walls and
stationary furniture. Slots on the sides of the nozzle increase airflow to the edges of
the cleaner and add to the cleaning efficiency of the cleaner. To operate, simply run
cleaner along edge board. Edge Kleener
®
operates instantly and automatically.