Filter
Top Products
2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to identify parts of vacuum cleaner
U belt
( HEPA filter
on some models)
Exhaust filter
EF6
Screen
Filter
DCF21
Brush roll
Handle
Turbo nozzle
(on some models)
Filter and screen
(located inside dust cup)
Dust cup
Exhaust/HEPA
filter compartment
(located behind dust cup)
Height adjustment knob
Brush roll cover
Upper cord retainer
Upper hose retainer
Dusting brush
Carry handle and cord wrap
Lower cord retainer
(on carry handle)
Wand
Power cord
Quick release cord wrap
Lower hose retainer
Base hose
Maintenance schedule
Maintenance Schedule is also located on back side of dust cup.
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked for on-OFF.
I
Air path
selector knob
Power switch
Handle
release
Hose
Crevice tool
DUST CUP – Empty after each use
FILTER DCF21 – Replace or clean regularly to maintain suction
Close bottom lid
until it clicks.
Press lever to release bottom lid.
Debris will empty.
Empty cup.Pull back
latch to lift off lid.
For quick clean,
tap filter.
Grasp filter and twist to remove
from lid.Shake dust from filter.
Reinstall filter. Align lid
at front;press down until
lid snaps into place.
Remove screen.Rinse
screen and dust cup.
Dry thoroughly.
Align tab with slot to
reinstall screen.
SPECIAL FEATURES
Available on some models
Turbo nozzle
Turbo cover
BRUSH ROLL – Clean monthly
U BELT –
Replace worn,cut or out of shape belt
Remove dust cup. Press down tab and
remove filter cover.
Lift out filter and replace.Reinstall
cover and snap into place.
EXHAUST FILTER EF6 – Check filter regularly. Replace every
6-12 months or when performance loss is noticeably declining