Eureka AS1009 Vacuum Cleaner User Manual


 
ENGLISH
3
W
A
N
D
1
1
W
A
N
D
22
W
A
N
D
1
1
T
O
O
L
S
F
L
O
O
R
S
Dusting brush
Use for furniture, drapes and vents.
Turbo nozzle
(with some models or available for purchase)
Use for furniture and stairs.
Bare floor nozzle and wand
(with some models or available for purchase)
Use for hard surfaces.
Stair hose
(with some models or available for purchase)
Make sure vacuum is below you,
pushed against the bottom step.
1) Attach stair hose to end of hose
or wand.
2) Attach turbo nozzle to end of
stair hose.
NOTE: Hose length can be increased by
releasing the hose from the hose retainer
on back of unit. Reposition hose inside
hose retainer after using accessories.
Crevice tool
Use for baseboards, corners and
tight spaces.
Before using accessories
1) Raise height adjustment to ‘high carpet.’
2) Turn air path selector knob to ‘tools.’
2-Position wand
Loosen wand and hose from back
of vacuum.
Push tool onto end of wand.
For short wand, push hose release button
to remove wand. Attach tool to end of
hose.
3
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to use accessories
WAND
11
!
C A U T I O N
When using tools, always place handle in upright position to
raise vacuum to highest carpet setting. Brush roll will continue
to turn when vacuum is turned on and handle is in upright
position.Do not tilt vacuum forward while using tools.To avoid
damage, do not set vacuum on carpet, carpeted stairs,
furniture or fringed rugs when using tools.