Filter
Top Products
6
HOW TO USE
An upright vacuum cleaner will clean any type of carpet. Use the attachments to clean upholstery or bare floors. When
using attachment tools, place the handle in the upright position. Do not place cleaner on furniture or steps as the
brush roll may cause damage.
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing,
hair, fingers, and all other parts of
body away from any moving part
(such as the revolving brush). Turn off
the switch and unplug the cleaner
before changing the cleaner height
setting.
The front of the cleaner has an adjustment that raises
or lowers the cleaner base to match the type of carpet.
With the cleaner cord unplugged, set the adjustment
to lowest setting for maximum cleaning. If the cleaner
is difficult to push, move adjustment to next highest
setting until cleaner is comfortable to push. The brush
roll must reach the carpet for effective cleaning.
Make each adjustment with cleaner switch off and
cord disconnected from outlet. For ease in moving
the adjustment knob, place handle in operating
position and tilt cleaner back to remove weight from
front wheels.
5. Step on handle release. Pull handle back to a
comfortable position.
6. Push On or Off power switch.
Handle
Release
Clean
Under
3
6
5
1
Store or
Use Attachments
Operate
Cord
Clip
POWER
1. Adjust cleaner height setting to lowest position for
maximum cleaning. Adjust to a higher setting to
make pushing easier. For easy adjustment, tilt the
cleaner back to move setting knob.
2. Push selector to Carpet/Floor cleaning (7800
Series only).
3. Place electrical cord out of the way on the cord
clip while vacuuming or storing.
4. Plug electrical cord into outlet.
POWER
1
POWER
2
Carpet/Floor
Tools