Filter
Top Products
6
Carpet
Off
Bare Floor
Select bare floor or
carpet cleaning
Detail A
Step here
&
pull up
to release
n
n
n
n
k
Quick
Release
Lower
Assembly
Handle Release
k
k
n
Power-Touch
Hose Handle
k
How to Assemble and Use
POWER-TOUCH
®
Handle
Remote ON/OFF Selector for bare floor or carpet
Carpet – push down on front
*Off – middle
Bare Floor – push down on back
*Power ON/OFF can be controlled on some models
from the POWER-TOUCH handle switch or canister
ON/OFF switch. Other models can only use the
canister switch.
Remote Speed Control (optional)
Adjusts the speed of the canister motor, slide to reduce
or increase power as needed.
Vacuum Control
Cleaning suction is reduced by
pushing lever to LOW position.
Place lever at HIGH position
to increase suction for carpet
cleaning.
Available on models without
Remote Speed Control.
1. Snap interlocking wands together.
2. Push assembled wands into the quick release
socket attached to a power nozzle.
3. Push motorized nozzle plug into the retainer
located at the top of the upper wand; secure cord
in slot (Detail A).
4. Place Power-Touch hose handle into wands until
plug connects and button locks.
Continue on next page to complete assembly.
4
10
1
2
8
3