Eureka 5180 Vacuum Cleaner User Manual


 
How To Replace Filters:
Motor Filter
Check the motor filter with each disposable dust bag
change. Cleaning the motor filter is recommended between
filter changes.
To Clean Motor Filter
1. Remove the front bag cover.
2. Remove filter from inside the bag compartment (lower
left side).
3. Shake filter to remove excess dust. If necessary, the
filter can be cleaned by vacuuming with another cleaner.
4. Reinstall filter when completely dry.
5. Replace the front bag cover.
14
HEPA Filter (on selected models)
Check the HEPA filter with each
disposable dust bag change. Replace
twice a year or after every six bag
changes.
To remove HEPA Filter
1. Push down latch and rotate the
HEPA filter back.
2. Then lift the filter up to remove.
To replace HEPA Filter
1. Place bottom tabs of new filter into
slots.
2. Rotate the HEPA filter toward
cleaner.
3. Push upward on the latch to
secure into place.
Obtain replacement filters from a local
dealer or order them from The Eureka
Company, Bloomington, IL.
Latch
MICRON Filter (on selected
models)
Check the MICRON filter with each
disposable dust bag change.
To remove MICRON Filter
1. Push down latch and rotate the
MICRON filter back.
2. Then lift the filter out of the filter
housing to remove.
To replace MICRON Filter
1. Place new filter into filter housing
then put bottom tabs of filter into
slots.
2. Rotate the MICRON filter toward
cleaner.
3. Push upward on the latch to secure
into place.