Filter
Top Products
10
ENGLISH
HOW TO ASSEMBLE (continued)
Step 4: Secure the hose assembly
●
D
to the hose connection on the rear
housing
●
I
with 2 short screws
●
K1
(FIG. 4).
FIG. 4
FIG. 5
FIG. 6
●
J
●
I
●
K1
(CONTINUED)
FIG. 6a
Step 5: Thread the hose inside the lower hose retainer
●
J
and then
attach the lower hose retainer to the rear housing with a short
screw
●
K1
(FIG. 5).
Step 6: Pull the electrical cord up to the cord retainer and firmly push into
the retainer (FIG. 6a)
.
This will keep the cord out of the way for next
use. Wrap the cord around the carrying handle on the tool caddy
and then wrap around the cord release hook. Secure the plug to the
power cord with the notch in the plug to prevent unwinding (FIG. 6).
●
K1
●
K1