Filter
Top Products
12
How To Replace Bags–Style AA Filteraire
NOTE: Turn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum
cleaner without the dust bag or the filter.
NOTE: Style AA Filteraire bags must be used to maintain HEPA grade filtration and prolong the life of the HEPA
filter. We recommend using only Genuine Eureka Filteraire Bags, part number 58623.
NOTE: Models without HEPA filter option, may use Style AA bags, part number 58236, rather than Style AA Filteraire.
It may be more convenient to lower the handle to the floor before changing the bag.
To Remove Bag:
|
|
Front
Cover
A
|
|
B
A. Remove front cover by unlatching the front cover latch
and lifting the front cover upward and out.
B. Remove left side of bag collar from bag collar
retainer. Grasp bag collar; pull down slightly and
out to remove bag.
To Replace New Bag:
C. Fold sides on new paper bag below bag collar.
D. Align bag collar hole and notch with hose tube.
E. Place rear of bag collar on ledges. Push back and
rotate upward until firmly in place.
F. Make sure collar snaps into position and hose tube is
securely inserted into bag collar hole. Tuck bag into
bottom and along sides.
G. Align front cover tabs and close cover. Make sure paper
bag is not caught under the front cover.
D
E
C
Bag
Side
E
Front Cover
Latch
Bag Collar
F