Filter
Top Products
5
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure on/off switch is in off position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Handle
CAUTION: Do not catch cord under handle.
Step B Attach Hose
1. From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.
2. Attach handle with two 1 inch screws in the assembly
packet. Use either a slotted or Phillips
®
head
screwdriver.
NOTE: Hand tighten with screwdriver to be sure
both screws are firmly seated.
Groove
Groove
1
2
3. From front of cleaner, insert hose adapter into opening
on top of unit. Make sure the button on the hose
adapter is secure in the hole on the unit.
4. From back of cleaner, insert the other end of the hose
into the hose retainer.
4
3
Button
Hole
Hose Retainer
Hose