9
To remove HEPA cartridge lters
1. Push down latch and pull lter cassette back.
2. Then lift lter up and remove.
To replace HEPA cartridge lters
1. Place bottom tabs of lter cassette into slots.
2. Rotate lter toward cleaner.
3. Push upward on the latch to secure into
place.
NOTE: To have the benet of a sealed
HEPA system, you must use
one of the HEPA cartridge lter
systems.
HEPA Cartridge Filters
(Only for models with HEPA cartridge.)
Check the HEPA lters with each disposable dust bag
change. Replace twice a year or after every six bag
changes.
Latch
Tabs
Filter Cartridge
(One complete
unit)
How to Clear Hose Clogs
Note: Turn off the switch and unplug the
electrical cord before clearing hose.
1. Step on handle release.
2. Lower handle until cleaner is at on the oor.
3. Turn the cleaner over so back side faces up.
4. Lift cleaner and rest it against a support or
counter.
5. Pull upward on the attached wand portion of the hose
assembly and remove from the hose retainer.
6. Check for clogs in the hose retainer and throughout
the hose assembly.
7. Use a tool that will not puncture the hose. Clear any
debris from the hose retainer or the hose assembly
that could restrict the air movement.
8. Flexing the hose may help loosen the clog.
9. After the clog is removed make sure the hose
assembly, and handle are reassembled onto the
unit.
10. If the clog is hard to remove, check the brush roll
area. Remove the hood and clear the hose inlet in
the brush roll area.
To remove lters from lter frame.
1. Push down latch and pull lter frame back.
2. Then lift lter up and out of lter frame.
To replace lters into lter frame.
1. Place new lter in lter frame. Place bottom tabs of lter frame
into slots.
2. Rotate lter frame toward cleaner.
3. Push upward on the latch to secure into place.
Use GENUINE EUREKA replacement lters, HEPA ,
part no. 61500; Micron, part no. 60801.
Filters in Filter Frame
(Only for models with lter frame)
Check the lter each time dust cup is emptied or as needed.
Replace twice a year as needed.
Filter Frame plus
lter (depending
on your vacuum
model)
Filter
Filter
Frame
Hose
Assembly
Attached
Wand
Hose
Retainer