Filter
Top Products
Clean Dust Cup Filter
Clean the dust cup fi lter as necessary.
1. Remove dust cup.
2. Grasp handle inside fi lter and pull fi lter
out of dust cup.
3. Shake and brush the dust and dirt from
fi lter.
4. To replace fi lter, push fi lter into dust cup
so that fl exible rim of fi lter fi ts securely
into dust cup.
5. If desired, remove filter from frame,
launder the fi lter by hand in warm water
using a mild detergent.
6. Air dry thoroughtly.
7. Replace fi lter on frame and reinstall in
dust cup.
Replace a dirty or torn fi lter. Order additional
dust cup fi lters from The Eureka Company,
Bloomington, IL 61701. Order dust cup fi lter,
part number 60958.
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the
cleaner operating at top effi ciency. Empty the dust cup after each use.
NOTE: Turn off the power switch and unplug the electrical cord to service.
Empty Dust Cup
1. Pull dust cup latch
up.
2. Swing dust cup out
from body and up
off the dust cup
hook on the body.
4. To replace dust cup,
fi t dust cup down onto
hook.
5. Swing down and push
gently into body until
dust cup clicks into
place.
3. Remove dust cup fi lter
from the dust cup, shake
contents of dust cup into
a waste container.
Latch
Hook
6
NOTE: The dust cup fi lter
is
not
dishwasher
safe.
Do not
put in
dishwasher.