Filter
Top Products
HOW TO ASSEMBLE
Attach Handle
1. Locate the handle and body.
2. Line the handle up with the hole in the
top of the body. Flat side of handle and
loop forward.
3. Push handle down into body while
pressing button on back of the body.
Handle will click into place.
4. There are two handle positions available.
Handle all the way up and handle all the
way down.
5. Button needs to be depressed to raise
and lower the handle.
Button
5
5
Loop
Handle
Body
HOW TO USE
Power Switch
The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Nozzle with Edge Kleener
®
Airfl ow under the nozzle automatically directs
suction to the edges and corners for maximum
full width cleaning.
Experiment with your hard fl oor surfaces,
sometimes it is best to have brush roll
turning. (Switch in the carpet position).
Dual Uses
Push the handle button to release
lock. The handle will slide freely until
it fi nds one of the two available handle
positions. It automatically locks in either
of these two positions.
With the handle collapsed, the unit is
great for stairs and compact storage.
With the handle extended, the unit is
great for fl oor cleaning.
Power
Switch
Stair
Stair
Cleaning
Cleaning
Handle
Handle