Filter
Top Products
5
STEP
1
SET UP
A. Fill Shampoo Bottle
If handle is folded, lift handle to operating position.
1) Lift up and pull out the shampoo bottle, fill with
Eureka Carpet & Upholstery Concentrate only.
2) Close cap tightly, and replace shampoo bottle.
3) Gently push until the shampoo bottle snaps into
place.
NOTE: When moving the extractor from one location to another, always make sure the recovery and clean water
solution tanks are completely empty. Then tilt the unit slightly backward and roll on rear wheels, fold the looped
handle and use the carrying handle for transporting up and down stairs.
NOTE: Familiarize yourself with the parts of the extractor by reading this ownerʼs
manual before using.
IMPORTANT: For best results, begin with a clean surface by vacuuming surface or
item before using the extractor.
B. Fill Clean Water Tank
1) Lift up and pull out clean water tank.
2) Fill tank to the designated fill line with hot tap water
(not boiling), replace cap.
3) Gently push until the clean water tank snaps back
into position.
Shampoo
Bottle
Clean
Water
Tank
Cap
OptiHEAT™ Heat Retention System (Available on Some Models Only)
IMPORTANT: Fill clean water tank with hot tap water. Do not use boiling water.
Why is heated cleaning better?
Testing has shown that cleaning with hot tap water at the normal household temperature (110º to 120º) actually cleans better
than cold water or water at room temperature. Using water at temperatures above the normal level does not significantly
increase cleaning ability.
What is OptiHEAT™?
Eureka's exclusive OptiHEAT™, Heat Retention System, maintains the temperature of the clean water so you are always
cleaning at the optimal temperature. The unique OptiHEAT™ tank system is designed to keep hot tap water within the optimal
temperature zone for a normal period of use.