Eureka 160 Series Vacuum Cleaner User Manual


 
1. Remove dust cup.
2. Pull dust cup filter out of dust cup.
3. Shake and brush the dust and dirt from
filter.
4. If desired, launder the filter by hand in
warm water using a mild detergent.
NOTE: The dust cup filter is not
dishwasher safe. Do not put in
diswasher.
5. Air dry thoroughly.
6. Replace filter in dust cup by pushing the
seal located at the top in firmly to ensure
proper filter performance.
Clean Dust Cup Filter
NOTE: Turn off the power switch and unplug the electrical cord to service.
Clean the dust cup filter as necessary.
8
Replace a dirty or torn filter. Order additional dust cup filters from The Eureka
Company, Bloomington, IL 61701. Order dust cup filter, part number 61544. To
place an order please telephone 1-800-282-2886.
Clean Brush Roll (on some models)
NOTE: Turn off the power switch and unplug the electrical cord to service.
The brush roll turns to sweep and comb the carpet nap. Keep the brush roll free from
hair and threads so it will continue cleaning. When the bristles of the brush roll no longer
touch a piece of cardboard held across the bottom plate, the brush roll is ineffective
because the bristles no longer touch the carpet nap. To maintain the most effective
cleaning, install a new brush roll.