Eureka 160 Series Vacuum Cleaner User Manual


 
HOW TO ASSEMBLE (continued)
6
Upper Cord
Retaining Hook
Hang Cleaner
Lower Cord
Retaining Hook
4
Nozzle with Edge Kleener
®
The nozzle turns down for regular or low
profile cleaning. Airflow under the nozzle
automatically directs suction to the edges
and corners for maximum full width
cleaning.
Off
Floors
3. Store Cord
Pull up on the electrical cord. Push
cord into cord retainer inside upper
cord hook. Wrap cord around upper
and lower cord hooks. Fasten plug to
electrical cord to prevent unwinding.
4. Store Unit
Use the hole in the handle to hang
the cleaner for storage.
HOW TO USE
Power Switch
NOTE: On models without the brush roll in the nozzle, the power switch will have
two positions, on and off.
1. Slide the power switch forward to turn on; slide backward to turn off.
2. Select type of cleaning. Carpet cleaning starts the brush roll turning. Bare floor cleaning
stops the brush roll. NOTE: Some models do not have a brush roll.
3
3
Dual Uses
To operate as a hand
vac remove the handle
by releasing the lock
button.
To operate as a stick vac
attach the upper handle.
Lock
Button
Carpets