Filter
Top Products
2
INSTALLATION
Tools and Supplies You Need ......................................... 3
Safety Rules ................................................................... 3
Data................................................................................ 3
Locating Your Cooler ...................................................... 4
Converting to Side Outlet ............................................... 5
Mounting Cooler ............................................................. 6
Electrical Connections ................................................... 7
Final Assembly and Adjustment .....................................8
Startup Check List.......................................................... 9
COOLER USE
Cooling Your Home....................................................... 10
COOLER CARE
Spring, Summer and Fall Care..................................... 11
Taking Off and Putting on Grilles .................................11
Taking Off Pad.............................................................. 12
Cleaning ....................................................................... 12
Putting On Pad ............................................................. 13
Oiling ............................................................................ 13
Blower Belt Adjustment ................................................ 13
REPAIR PARTS...................................................... 38
INTRODUCTION
Your new air cooler uses a new design for evaporating water to cool air. The low energy use of conventional evapora-
tive air coolers is combined with new water handling methods and materials which help overcome most rust problems
of conventional coolers. Your new cooler requires no pad prewetting and is easy to clean. The compact size and mod-
ern appearance allow easy installation.
Please read our instructions before you install and use your new cooler. This will help you obtain the full benefits from
your cooler and will also help you avoid any needless service costs that result from causes we cannot control and can-
not cover in our warranty.
LIMITED WARRANTY
All products covered by this Instruction Sheet are warranted against defects in workmanship and materials for one year from date of sale.
This warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the
nameplate voltage; nor to equipment improperly installed or wired or maintained in violation of this Instruction Sheet. This warranty is valid only
in the fifty states of the United States. No other written or oral warranty applies. No employee, agent, dealer or other person is authorized to
give any warranties on behalf of ESSICK.
The customer shall be responsible for all costs incurred in the removal or reinstallation of the product for repairs. Within the limitations of this
warranty, inoperative parts should be returned freight prepaid to ESSICK service center and we will repair or replace, at our option, at no
charge to you with return freight paid by ESSICK. It is agreed that such repair or replacement is the exclusive remedy available from ESSICK AIR
PRODUCTS and that ESSICK IS NOT RESPONSIBLE FOR DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND CONSEQUENTIAL
DAMAGE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation
may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
No merchandise should be returned to ESSICK AIR PRODUCTS without return authorization. When requesting a return authorization include
model numbers, part numbers, date and place of purchase.
ESSICK AIR PRODUCTS 5800 MURRAY LITTLE ROCK, ARKANSAS 72209
Note: Replacement of filter pads is normal maintenance and is not covered in the warranty.
To function properly, your cooler must be installed correctly. You must know how to use tools and equipment.
CONTENTS