Filter
Top Products
M4 x 10mm
M4 x 10mm
4mm
M4 x 8 mm
2.5mm
B
8 of 18
888-45-040P-01 rev.H • 10/07
WARNING
Weight balanced arms will spring
upward and may cause personal
injury or equipment damage when
weight of monitor is removed.
Secure arm or lift into full up
position when removing monitor.
Ergotron's Notebook Tray is designed to attach to Ergotron
Arms and Stands with a 75mm x 75mm hole pattern. If you
are attaching the Tray to a non-Ergotron product, before
proceeding with this installation, you should contact the
manufacturer of that mounting solution.
NOTE: After you have attached the Ergotron Notebook
Tray and your notebook according to these Assembly
Instructions, make sure that the Arm/Stand has been
adjusted properly to support the weight of both the
Notebook Tray and your notebook. - For more information,
please contact Ergotron Customer Care.
ATTACH NOTEBOOK
ABCDE
1
2
3
1x 1x 4x 4x 1x
2x
1x
3x
2x 1x 2x
1x
4