Enviro Empress Stove User Manual


  Open as PDF
of 2
 
Enviro Empress Pellet Stoves and Inserts
Manufactured by Sherwood Industries Ltd., Victoria, BC, Canada
www.enviro.com • email: info@enviro.com • Printed in Canada June, 2008
Due to on-going product development, product apperances and specifications are subject to change without notice. *Area heated
will vary according to fuel type and venting. **Depending on fuel density. Approved for sale in Canada and United States.
Design -
The design for the Empress
FS and FPI captures all the best
features that cast iron has to offer -
solid, timeless construction with
detailed patterns and curves.
The doors open to allow you to enjoy
your fire to the fullest.
Performance -
FS and FPI - heat is easy to control with our automatic control system.
The Empress stoves are thermostat compatible in Hi/Lo mode or Auto/Off mode.
FPI - We have incorporated a cast iron heat exchanger into the Empress FPI to
maximize the heat output, yet keep rear height low. This insert also has an adjust-
able hopper and an easy vent disconnect to allow for a more versatile fit. The
Empress sits only 9” onto the hearth and the sliding hopper lid makes the unit easy
to fill with pellet fuel.
Specifications
Empress FS Empress FPI
Area heated*
800-1,600 sq. ft. 800-1,500 sq. ft.
BTU/H input max 35,000 BTU’s 34,000 BTU’s
BTU/H input min 9,000 BTU’s 9,000 BTU’s
Weight 230 lbs 255 lbs
Hopper Capacity ** 55 lbs up to 55 lbs
Variable Speed Fan 105 cfm 160 cfm
Dimensions:
Empress FS:
26” deep
26 1/2” wide
27 1/2” high
Empress FPI:
Surround- 30” H (27” at corners) x 42” W
Riser Trim - 2”H x 42”W
Body excluding surround - 31”W x 22”H
Unit behind surround- 28”W x 19 1/2”H
(at lower setting)
Unit at back of hopper- 23”W x 19 1/2” H
(at lower setting)
Unit depth into firebox - 15”
Exclusive Features:
Tri-mode operating system
Manual operation
Auto/Off thermostat compatible
Hi/Lo thermostat compatible
Large viewing area (249 sq. in.)
Standard 400w ignitor
Optional firescreen
Optional outside combustion blower kit (FS only)
Large heat exchanger
FPI Features:
Adjustable hopper 22” down to 19 1/2”
Vertical venting with optional built-in 90
o
elbow
Bay front extends only 9” onto hearth
Sliding hopper lid for easy pellet filling
Certain colors may
require longer lead times.
Please share and recycle this brochure
 previous