Filter
Top Products
14
Installation
HEARTH MOUNT INSTALLATION:
Rain cap
Storm collar
Seal plate (cover plate)
Existing masonry flue
Vent pipe (single wall
stainless flex pipe or
solid PL vent)
Fireplace damper
location
Clean out tee
Existing fireplace
Flexible vent connector
(use this 5 foot [152cm]
section of pipe to vent
past fireplace damper
or small shelf)
Figure 18: Freestanding hearth mount installation overview.
Refer to Figures 17 and 18.
1. Install the hearth pad.
2. Lock fireplace damper in the open position.
3. Install a positive flue connector at the
fireplace dampers or seal the chimney at
the top.
4. Connect a tee to the exhaust pipe.
5. Install flexible stainless steel liner or listed
pellet vent to the top of the chimney.
Flue
Connector
Figure 17: Freestanding hearth mount installation.