Filter
Top Products
13
HEARTH MOUNT INSTALLATION:
Installation
Rain cap
Flashing
24"
(61 cm)
4"
(10 cm)
Tee with
cleanout
3" (7.5 cm)
Clearance
Support
bracket
Type "L"
vent
Figure 13: Outside Vertical Installation.
Refer to Figures 14 and 15.
1. Install the hearth pad.
2. Lock fireplace damper in the
open position.
3. Install a positive flue
connector at the fireplace
dampers.
4. Connect a tee or a 90° elbow
to the exhaust pipe.
5. Install flexible stainless steel
liner or listed pellet vent to
the top of the chimney.
Figure 14: Freestanding hearth mount installation.