Filter
Top Products
7
LED Operation
System Normal (Green):
• ON continuously when power is applied
to sensor.
Alarm Pending (Yellow):
• ON continuously during leak detect filter
delay and cable fault delay.
• FLASHING (with Leak Detected LED) to
indicate cable fault condition.
Leak Detected (Red):
• FLASHING to indicate leak detected
alarm.
• FLASHING (with Alarm Pending LED)
to indicate cable fault condition.
Notes
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to
correct the interference at his own expense.
In the event of a severe leak causing submersion or partial-submer-
sion of the enclosure and/or the electronic circuitry inside the enclo-
sure, the entire module should be returned to the factory for
inspection.
System
Normal
Alarm
Pending
Leak
Detected
Reset
Cable
Fault
Liqui-tect
®
Sensor
LT460