Filter
Top Products
List Price CUSL-31
Effective: December 4, 2006
(Supersedes CUSL-30)
HIGHER RAISED RIM*
Elkay standard raised rim is 5/32". Raised
edges up to 3" can be supplied. Add for
each linear foot.
Up to 1" high, per foot ...................$42.00
1" to 2" high, per foot.......................47.00
2" to 3" high, per foot.......................51.00
*Not available with feature #5 or #7
LEG TYPE SUPPORTS
1 5/8" O.D. stainless steel tubing
(up to 34 1/2" long)
Each leg..........................................$225.00
34 1/2" leg places sink 36", floor to sink top
rim). Gusset welded to steel under channel
of top.
Note: Add #20B steel channels for
proper top support.
SINK COMPARTMENT FLAT COVERS
Extra charge for each cover made
of #16 gauge, polished stainless
steel, for any size up to 20"x30"
single compartment...
add, per cover................................$507.00
CUP TYPE SINKS
Made of #16 gauge, type #316 stainless
steel with 3/4" flange. 11/2" IPS, SS outlet,
2 1/4" long tailpiece.
4" dia. x 4" deep . . . . . . . . . . . . . . .$672.00
5" dia. x 4" deep . . . . . . . . . . . . . . . .699.00
6 1/2" dia. x 5" deep . . . . . . . . . . . .745.00
Above prices include cost of seamlessly
welding each cup sink into countertops.
RECESSING COMPARTMENTS FOR
FLUSH MOUNT COVERS*
Where this feature is required add,
as extra charge for recessing
each compartment . . . . . . . . . . . .$507.00
*Not available on oval and round bowls.
SPECIAL ROUND OPENINGS
For each round opening cut-out
up to 1 1/2" diameter, add . . . . . .$30.00
Over 1 1/2" up to 6" diameter,
add . . . . . . . . . . . . . . . . . . . . . . . . .92.00
For each vandal proof type
hole, add . . . . . . . . . . . . . . . . . . . .78.00
For each hole with 3/8" flange
turned up or down, add . . . . . . . .188.00
(No extra charge for furnishing 1 1/2" diameter
faucet openings.)
SPECIAL WOOD FASTENING STRIPS
OR STEEL CHANNELS
A.Wood strips are supplied 2" wide
as standard. Add for width over
2" up to 4", add per linear foot . .$ 10.00
B.Steel channels (instead of wood)
add for each linear foot required . .40.00
Note: Channel support is provided to the front
length, left and right widths, for tops over 96" in
length, back length also needs to be supported.
*See #18 if legs req’d or #19 if brackets req’d.
SUPPORTING BRACKETS
#14 gauge stainless steel, angle
type solid brackets, each................$159.00
Note: Add #20B steel channels for
proper top support.
APRONS FOR SINKS (#18 Gauge)
For adding 7" to 9" apron up to 48"
length add flat extra charge of .......$386.00
Beyond 48" (including return ends)
add for each additional linear inch.......5.00
17 18 19 20
21 22 23 24
25 26 27
1"
3" maximum
STYLE “FD" AND STYLE “FU" SHELVING
Fabricated of #18 gauge, nickel bearing (18-8, type 304) stainless
steel with flat rim. (Brackets extra).
Shelf widths
6" 8" 10" 12"
Min, base–(up to 24" long) $286.00 $290.00 $301.00 $309.00
Add for each inch of length 9.00 10.00 10.00 11.00
Brackets (#16 gauge St.St.)
Each 82.00 82.00 89.00 89.00
(If #16 gauge shelving required, add 10% to above.)
STYLE “RD" AND STYLE “RU" SHELVING
Fabricated of #18 gauge, nickel bearing (18-8, type 304) stainless
steel with raised rim. (Brackets extra).
Shelf widths
6" 8" 10" 12"
Min, base–(up to 24" long) $334.00 $338.00 $348.00 $358.00
Add for each inch of length 9.00 10.00 10.00 11.00
Brackets (#16 gauge St.St.)
Each 82.00 82.00 89.00 89.00
(If #16 gauge shelving required, add 10% to above.)
Finger lift
Diameter
of hole
3/8"
3/8"
1"
1"
1"
1"
1"
1"
Recess for flush cover
“FD"
“FU"
“RD"
“RU"
SPECIAL NOTES
Optional construction
#16 gauge top construction, with channel type reinforcing members,
(less solid reinforcing plate feature) will be furnished at same price as #18 gauge
when required.
Optional materials
Units may also be fabricated of Type 316 stainless steel. Price on application.
4"
4" max.
2"
All dimensions are in inches. To convert to millimeters, multiply inches by 25.4.
7
CCuussttoomm FFeeaattuurreess PPrriiccee SScchheedduullee