Filter
Top Products
The quality of light and exceptional performance is the result of long research, application of de-
manding principles, the long experience of ELINCHROM in lighting products for the studio and the
utilisation of the latest technology in this area.
Totally integrated to the range of ELINCHROM flashes, the D-Lite 2 it - D-Lite 4 it units maintain
the traditional look and function that is ELINCHROM.
The controls provide continuously variable adjustment of the flash power with precision over
5 f-stop, from full power 1/1 to 1/16 th, & modelling lamp with prop/min/max/off mode.
D-Lite 2 it / D-Lite 4 it Compact Flash
Dear Photographer,
Thank you for buying your D-Lite it compact flash unit.
All Elinchrom products are manufactured using the most advanced technology. Carefully selected
components are used to ensure the highest quality and the equipment is submitted to many controls
both during and after manufacture. We trust that it will give you many years of reliable service.
All D-Lite it flash units are manufactured for the studio and location use of professional photogra-
phers. Only by observance of the information given, you can secure your warranty, prevent possible
damage and increase the life of this equipment.
This equipement has been tested and found to comply with the limits for a class B digital device, pursuant to Part
15 of the FCC Rules and meets all requirements of the Canadian Interference-Causing Equipement Regulations.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipement generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipement does not cause
harmful interferences to radio or television reception, which can be determined by turning the equipement off
and on, the user is encouraged to correct the interferences by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipement and receiver.
- Connect the equipement into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Elinchrom LTD is not responsible for any radio or television interference caused by unauthorised modifications
of this equipement or the substitution or attachment of connecting cables and equipement other than those
specified by Elinchrom LTD The correction of interference caused by such unauthorised modification, substitution
or attachment will be the responsibility of the user.
FCC Class B Compliance Statement
Introduction English
2