Elinchrom 4 IT Home Safety Product User Manual


  Open as PDF
of 105
 
SET Cong Mode:
(to congure included features only with MAC°/ PC° EL-Skyport Software V. 3.0)
-SwitchthemoduleOFF//removebattery..
-HoldtheTestbuttondownwhilstyouinsertthebattery..
-KeeptestpushbuttonpresseduntilSTATUSLEDisON.
PleasecheckalsoEL-SkyportPC/MACsoftware3.0forchangingTransmittersetting.
EL-Skyport Eco Features
Power save mode timer:
-AfternotusingtheTransmitterfor30minutesthePowerSavemodeisactive.Toreactivatethe
Transmitter,presstheTESTpushbutton.
-ThePowerSavemodetimercanbeconguredwiththeEL-SkyportPC/MACsoftwarev3.0andhigher.
Status LED:
-LEDashesevery4secondsonetimein“Standard”modeandtwotimesin“Speed”mode.
-LEDintensitycorrespondtothebatterystatus-ifofforverylow=>exchangethebattery.
-LEDisOFFiftheTransmitterbatteryisdischargedorin“PowerSave”mode.
.
Reset to manufacturer default setting:
-SwitchthemoduleON//insertbattery.
-Presstestbuttonformin10seconds.
Note:
“GROUP”settingsarenotavailablefortheEL-SkyportECOTransmitter.
18
 previous next