Filter
Top Products
12 English
Timer and Changing
the Message Display Language
Programmable
Timer
Normal. Timer: Auto
Select timer?
Normal. Timer: Auto
Select start time?
Timer
It is possible to set the time duration for
Normal or Quick vacuuming.
1. Select the desired vacuum program, or
press
twice til “Select timer?” is shown.
Confirm by pressing
.
2. Set the desired time setting by pressing
and then confirm by pressing . When
“Auto” is chosen Trilobite will cal culate its
own vacuuming time. When “On” is chosen,
use
to set desired time, confirm by
pressing
.
When “Off” is chosen Trilobite will clean until
charging is needed. For normal vacuuming
program, this is the vacuuming time after
edge cleaning.
3. Press
to commence vacuuming.
Language
Trilobite is able to present the information on
the display in a number of different languages.
1. To change the display language, switch on
Trilobite and press
.
2. Press until the displays asks whether you
want to change the language. Press
.
3. Press
to select the desired language and
confirm by pressing
.
Trilobite will now show display messages in
the selected language.
Status Messages
When you select a function, a status message is
shown on the display for about seven seconds.
After this, the name of the function is shown
again. It is of course possible to change or
confirm a displayed function even while the
status message is shown.
Trilobite can be programmed to clean at a
particular time on every day of the week.
To use this function, you must first activate
and program Trilobite’s day and time func-
tions. You can then set which day or days you
want Trilobite to clean on. After programming,
it is a simple matter to activate or deactivate
the setting.
NOTE: Trilobite can only start program med
cleaning if it is placed in the charging station.
Set clock
1. Start Trilobite.
2. Press
until “Select start time” is displayed.
3. Press
.
4. “Set time” is displayed.
5. Press
.
6. “Set day” is displayed. Press
until the
desired day is displayed.
7. Press .
8. “Set clock” is displayed.
9. Press
until the desired hour is displayed.
10. Press
.
11. Press
until the desired 10-minute block
is displayed.
12. Press .
13. Press
until the desired minute is
displayed.
14. Press . The day and time are now
displayed.
Trilobite_2_Eng_Fi_Ru.indd 12Trilobite_2_Eng_Fi_Ru.indd 12 04-07-01 15.18.1104-07-01 15.18.11