Filter
Top Products
How To Assemble (continued)
7
Pull the electrical cord up
to the cord retainer and
firmly push down into
retainer. This will keep
the cord out of the way the
next time you vacuum.
Wind the cord around the
two cord hooks on the
back of the vacuum.
Secure plug to the cord to
prevent unwinding.
Store the crevice tube or
extension tubes (on some
models) on the side of
the vacuum in front of the
hose.
Store the dusting brush.
8
9
10
11
How To Use
Helpful Information:
Listen to your cleaner. If you notice a change in the
sound of the motor or a change in performance, it could
simply indicate a common usage or maintenance issue,
such as: a need to raise or lower the carpet height
adjustment; possible blockage in hose or brushroll area;
or a broken or loose brushroll belt. These are all easy
to x and the instructions are included in this handbook.
Becoming familiar with the information in this guide will
help you to get the best possible performance from your
new cleaner for many years to come.
ON/OFF Switch.
International symbol I
means On, International
symbol O means Off.
Handle Release. Step
on handle release to pull
handle back to a comfortable
operating position. To lower
handle completely to the oor,
depress handle release a
second time.
Floor Type Selector. An adjustment that raises or lowers
the cleaner base to match the type of oor surface. With the
cleaner cord unplugged, set the adjustment to lowest setting for
maximum carpet cleaning. If the cleaner is difcult to push,
move adjustment to next highest setting until cleaner is
comfortable to push. The brushroll must reach the carpet for
effective cleaning. For ease in moving the adjustment knob,
place handle in operating position and tilt cleaner back to
remove weight from front wheels.
Helpful Information:
Before cleaning under low
furniture, check area rst
for objects that might harm
the cleaner or block the
vacuum hose.
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body
away from any moving part (such as the
revolving brush). Turn off the switch and
unplug the cleaner before changing the
oor type selector.
5