Electrolux Ultra Silencer Vacuum Cleaner User Manual


  Open as PDF
of 10
 
2111
13
0198
321
7654
English
CLEANING THE HOSE AND NOZZLE
The vacuum cleaner stops automatically if the nozzle, tube,
hoseorfiltersands-bag®becomesblocked.Insuchcases,
disconnectfrommainsandallowtocoolfor20-30minutes.
Clearblockageand/orreplacefiltersands-bag®andrestart.
Tubes and hoses
1Useacleaningstriporsimilartoclearthetubesandhose.
2 It may also be possible to remove the obstruction in the
hosebysqueezingit.However,becarefulincasethe
obstruction is caused by glass or needles caught inside
thehose.
Note: The warranty does not cover any damage to the hose
caused by cleaning it.
Cleaning the floor nozzle
3 To avoid deterioration of suction power, frequently
cleanthecarpet/hardfloornozzle.Theeasiestwayto
cleanitisbyusingthehosehandle.
4 Presseachwheel-hubanddrawawaythewheels.
5 Removedust-balls,hairorotherobjectsthatmaybe
entangled.Usethecrevicenozzletocleanthewheel
axles.Replacethewheelsbypressingthemontothe
axles.
6 Largerobjectscanbeaccessedbyremovingthecon-
nection hose (press the small catches located on each
side and simultaneously draw the connection tube
outwardsinanuprightposition).
7 Removetheobject(s)andreplacetheconnectionhose.
Cleaning the power nozzle
(certain models only)
8 Disconnect from the mains, and remove entangled
threadsetc.bysnippingthemawaywithscissors.
9 Useascrewdrivertoremovethenozzlecover.
10 Remove the brush cylinder and bearings, then clean as
necessary.
11 To clean the wheels, gently lever them from their
mountingsandcleanasnecessary.
12 Replacethecoverandmakesureitissecurelyfastened.
Cleaning the turbo nozzle
(certain models only)
13 Disconnect the nozzle from the vacuum cleaner tube
andremoveentangledthreads,etc.bysnippingthem
awaywithscissors.Usethehosehandletocleanthe
nozzle.
14
2193042-03.indd 14 12/6/07 4:34:57 PM
 previous next