Electrolux Ultra Silencer Vacuum Cleaner User Manual


  Open as PDF
of 10
 
8765
4321
13
1211109
English
GETTING THE BEST RESULTS
Use the nozzles as follows:
Carpets: Use the carpet/hard floor nozzle with the lever in
position(1).Reducesuctionpowerforsmallcarpets.
Hard floors: Use the carpet/hard floor nozzle with the lever
inposition(2).Ifyouhaveacarpet/hardfloornozzlewithtwo
pedals – press the pedal on the right (3) to vacuum up animal
hair,etc.moreeffectively.
Wooden floors: Use the parquet nozzle (certain models
only,4).
Upholstered furniture: Use the combination nozzle as
shownin(5).
Curtains, lightweight fabrics, etc.: Use the combination
nozzleasshownin(5).Reducesuctionpowerifnecessary.
Frames, bookshelves, etc.: Use the combination nozzle as
shownin(6)orEasyclean(7–certainmodelsonly).
Crevices, corners, etc.: Usethecrevicenozzle(8).
Using the power nozzle
(Requires an Ultra Silencer equipped with a power socket. The
power nozzle is delivered only with certain models, or could be
bought as an accessory.)
9 Attachthenozzletothetube.
10 Connect the power nozzle to the socket on the vacuum
cleaner.
11 Use the clips to secure the cable along the tubes and
hose.
12 The power nozzle starts operating when the vacuum
cleanerisswitchedon.
Using the turbo nozzle
(certain models only)
13 Attachthenozzletothetube.
Note: Do not use the power or turbo nozzle on skin rugs, rugs
with long fringes or a pile depth exceeding 15 mm. To avoid
damaging the carpet, do not keep the nozzle stationary whilst
the brush is rotating. Do not pass the nozzle across electric cab-
les, and be sure to switch off the vacuum cleaner immediately
after use.
10
2193042-03.indd 10 12/6/07 4:34:53 PM
 previous next