Filter
Top Products
Using the Power Nozzle
Use the power nozzle for every type of dry floor cleaning. It maneuvers easily around furniture and right up to walls,
providing superior edge cleaning and two-sided corner cleaning (Fig. O).
• Setting the switch to “I” engages the high speed brush to dig embedded grit from carpets and whisk up dust and
dirt from hard surface floors (Fig. P).
• To clean delicate rugs or highly polished parquet floors set the switch to “O”. The brush disengages and only the
cleaner’s suction is used (Fig. Q).
• If an object becomes clogged in the power nozzle it will automatically shut off. To restart power nozzle follow
these instructions:
Fig. R Turn the cleaner off and unplug power nozzle cord.
Fig. S If the object is caught in the revolving brush turn the
power nozzle over and gently remove the caught object
from the brush.
Fig. T If the object is caught further in the unit detach the wand
and remove the object through the elbow.
Fig. U Reattach the wand and power nozzle cord. Reset circuit
breaker button and turn cleaner on.
7
Fig. R
Fig. S
ON
“I”
OFF
“O”
Fig. T Fig. U
Fig. O
Fig. P Fig. Q