Filter
Top Products
Wand and Hose Assembly
To attach power nozzle, slide end of wand into elbow on nozzle (Fig. E). Plug cord on power nozzle into connector in
sheath (Fig. F). To disassemble unplug cord, press release button and pull wand out.
CAUTION: Turn appliance off before connecting or disconnecting power nozzle.
Information Panel
For normal running only the Green Power Symbol Is Illuminated.
Overheating Protection
The motor of this cleaner shuts off when the cleaner temperature rises above proper operating temperature. This
prevents damage from overheating, and prolongs cleaning power.
• If the cleaner shuts off, turn cleaner OFF and disconnect power cord.
• Check the wand, hose and power nozzle for blockage.
• With the power cord disconnected from outlet, allow the machine to cool for approximately 30 minutes before
using again.
• After cleaner returns to proper temperature, plug cord in, turn cleaner on, and resume cleaning.
5
Bag Change - Symbol will
illuminate and cleaner will
shut off. Replace filter bag,
reset ON/OFF switch.
Bag Check - Should you
attempt to operate cleaner
without a filter bag, the unit
will not start, and the bag
check symbol will appear.
Simply open the front cover
and insert a new filter bag; the
unit will then start.
Power - When not
illuminated, check
power source.
Overheating Protection -
See below.
Fig. E
Fig. F