Filter
Top Products
4
Unpacking & Inspection
Setup
WARNING:
Use of any fluid othe than ANTARI fog fluid or modification or
attempted to unauthorized repair of the fog machine will
immediately invalidate the warranty.
Open the shipping carton and verify that all equipment necessary to
operate the system has arrived intact.
Before beginning initial setup of your ANTARI Fog Machine, make sure
that there is no evident damage caused by transportation. In the event
that the unit's housing or cable is damaged, do not plug it in and do not
attempt to use it until after contacting your ANTARI dealer for
assistance.
Remove all packing materials from shipping box. Check
that all foam and plastic padding is removed, especially in
the nozzle area.
Place fog machine on a flat surface and remove fog liquid
tank cap.
Fill with only ANTARI Fog Fluid. ANTARI X Fogger only
works with uncontaminated ANTARI Fog Fluid. Other fluids
may cause spitting and serious clogging problem and could
resuit in the production of an unhealthful fog.The use of other
fluids voids the wananty of the ANTARI X Fogger. When
filled, place cap back on liquid tank.
Firmly attach the control module cable to the connector
inside the rear chamber of the machine.