Filter
Top Products
ELAR 108PAR RGBW™
©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com
<DFSE> - Restore Default
This function is used to restore the factory settings of the device. All settings will be set
back to the default values (shaded). Any edited scenes will be lost.
<VER> Software Version
This function will display the current firmware version.
9.3 “MANL” – Manual Fixture Settings:
This function allows the each of the nine DMX channels to be controlled manually. This
will allow the fixture to be preset to a specific color or built-in program without the use of
a DMX console.
9.4 “TIME” – Operating Hours
These functions will detail different time functions associated with the fixture.
<LIFE> (0000~9999 Hours)
This function tracks the running time of the fixture from the point it was last cleared.
Where “XXXX ”represents the total number of running hours. This time is none
destructive and will remain in the fixtures memory indefinitely. Use this time to track
rentals or show durations.
<CODE> Clear run time access code
This lock-out code prevents the current run time from being erased accidently. The
access code is “038”
<CLFE> Clear Fixture Run Time
This function resets the run time to zero.
9.5 “Edit” Internal Program Settings:
The fixture comes equipped with a built-in DMX recorder that allows custom programs to
be installed and recalled directly from the fixture’s control board. Programs can be
created and stored using the fixture’s control board or by using an external DMX