Filter
Top Products
ELAR 108PAR RGBW™
©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com
9. DISPLAY MENU
Default settings shaded.
Remarks:
1) If the fixture does not receive a DMX signal the menu display will flash
repeatedly.
2) TIME: Adjust the hold time for each scene in built-in chase programs.
3) FADE: Adjust the fade time between each scene in the built-in programs.
9.1 “MODE” - Function Mode:
9.1.1 <ADDR> - DMX address setting – This function is used to set or adjust the
fixture’s starting DMX address. Every device controlled by DMX has to have a unique
starting address. The addressing feature is what allows DMX to function properly. The
DMX address of a fixture is what allows it to communicate with a controller properly. The
DMX addressing also allows the fixture to ignore any DMX information coming from the
controller that is not meant specifically for the fixture. Because each fixture is connected
VALU
A001~AXXX (AXXX)
DMX address setting
SLAV
ON/OFF
Set as Slave
<ADDR>
RDMX
ON/OFF
Change address via DMX
<RUN>
AUTO
ALON/MAST
Run Auto program
VALU
D-XX D-00(DXXX)
Display DMX value
FLIP
ON/OFF
Flip display
MODE
<DISP>
D ON
ON/OFF
Delay shutting off LED display
<CHAN>
4CH/5CH/7CH/9CH
DMX channel Mode
<FAIL>
OFF/HOLD/AUTO
Status while there is no DMX
<DFSE>
ON/OFF
Default setting
SET
<VER>
V-1.0~V-9.9
Software version
MANL
<CH01>
~<CH09>
01 XX (00~FFH)
09 XX (00~FFH)
Manual adjust intensity
<LIFE>
0000~9999(hours)
Life time of machine running
<CODE>
CXXX
Password of clear time ”038”
TIME
<CLFE>
ON/OFF
Clear machine running time
<STEP>
S-01~S-48
Select steps of program
C-01~C-09
01 XX (00~FFH)
09 XX (00~FFH)
FADE
XXX
EDIT
<SC01>
~<SC48>
TIME
XXX.X (000.1s~999.9s)
Edit the internal scenes