Filter
Top Products
7.2.2. C – 251 LV
This charging station is designed for a supply voltage of 12-32
Volts DC. Complete recharging using a 12-Volt DC supply should
be completed in approximately 20-24 hours, using a 24 Volts DC
supply reduces this time to approximately 10-12 hours.
Correct connection of the cable wires is as follows:
Red: + terminal
Black: - terminal
8. Repairs
The general terms and conditions of ELEX V apply to repair work.
The manufacturer must carry out the repair work in order to check
for the safe functioning of the protective circuits.
9. Cleaning
The equipment should only be cleaned using a cloth or sponge
dampened with water. The use of cleaning solutions or scouring
agents is not advised.
10. Guarantee and liability
The instrument parts and functions are guaranteed for two years,
starting from the date of delivery. This guarantee remains valid if
defective components are submitted. We reserve the right to
exchange, modify or repair the equipment.
The company ECOM Rolf Nied GmbH is responsible for the gran-
ting of the guarantee. It takes no responsibility for damages,
expenses or losses resulting from the use or purchase of the
equipment. Neither is ECOM liable for damages, expenses or los-
ses arising from any special or subsequent damages.
Further, any use other than that as described in section 1 is not
permitted. ECOM is not liable for any damages resulting from any
differing or excessive use. The user carries this risk alone.
18
BAL H-251 A 4spr. DIN A 6 22.02.2002 12:14 Uhr Seite 18