Filter
Top Products
Wa t e r Pu m P
OP e r a t O r 's ma n u a l
9
____ 1 - Pump Assembly
____ 1 - Suction Hose (#21)
____ 1 - Operator's Manual
____ 1 - Warranty Registration Card
____ 1 - Plastic Bag
____ 1, Garden Hose Adaptor (#23)
____ 3, Hose Clamps (#20)
____ 2, Hose Fittings (#18)
____ 2, Hose Connecter (#19)
____ 2, Sealing Washers (#17)
____ 1, Strainer (#22)
____ 1 - Plastic Bag
____ 1, 8-10 mm Wrench
co n t e n t s
Due to packaging restrictions, the ECHO product you have purchased requires some assembly.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
as s e m b l y
s u c t I o n
h o s e
Tools Required: 8x10 mm Wrench
1. Remove vinyl cap from suction port (G).
2. Assemble suction hose (A) with clamp (B), hose connecter (C),
hose tting (D), and sealing washer (E) on one end and strainer
(F) with second clamp on the other end.
3. Attach hose to suction port (G).
NOTE
Longer 25 mm (1 inch) suction hose can be used up to a maximum
length of 7.5 m (24 feet).
IMPORTANT
• Make sure that all hose and pipe connections are air tight. An air
leak in the suction line or suction ttings may prevent priming
and will reduce the pumps capacity or efciency.
• Keep priming port plug and pump drain plug tightly secured in
place to prevent entry of air into the pump.
• Use an acceptable pipe thread sealant on all threaded nipple con-
nections.
IMPORTANT
Always use the strainer with the suction hose. Gravel or debris
sucked into the pump will cause serious impeller and housing dam-
age.
If the strainer clogs with debris, prevent the strainer from touching
the bottom. Placing the strainer in a submerged bucket or basket
may also work.
A
B
D
C
E
F
G
B