Earlex IS2000 Vacuum Cleaner User Manual


 
Fitting the Boiler Unit (1) to the Caddy (18)
Slide the Boiler into the centre of the Caddy until the yellow boiler release
latch (24) locks into place. To remove, press the boiler release latch down
and slide the Boiler backwards.
Storing the Handle (11), Hose (10) & Mains
Cable (17)
With the Steam Handle uncoiled in front of the unit
take the Mains Cable, and coil it tightly around the
base of the Boiler above the steam hose outlet so
that after 4
1
/2 turns the plug can be stored in the front recess (22). Then coil the hose 1
1
/2 turns until
the Handle parks into its Holster (2). Press down the Handle Release Button (12) and push the Handle
into the Holster so that the release button locks into its location. To remove, simply depress the release
button and withdraw the Handle.
Storing and removing Extension Tubes (25)
Slide the Extension Tubes into the front of the Caddy, button end
first and slide the tubes through the Caddy until the Release
Button (20) aligns and fits into the location (19). To remove, simply
depress the release button and withdraw the Extension Tube.
Note: It will be easier to do this when the main attachments are
not
stored in the Caddy.
Using the Shoulder Strap (33)
The Strap is used for the hand held function to
enable the user to carry the Boiler unit over the
shoulder. To unfasten the strap, release the popper
(6) and pull the strap out at the front end of the
Boiler until it is fully extended. The Boiler Unit can now be hung over your shoulder.
Fitting the Extension Tubes & Attachments
There are 3 Main Attachments (27, 28, 29), 3 Mini Attachments (14, 15, 16), 2 Extension Tubes and
a Clothing Attachment Rest (30) to use with your Steam Caddy, depending on the job you want to do.
All attachments are fitted either to the Extension Tubes or directly to the Handle, which ever is most
suitable for the task in hand.
The Main Attachments and the Extension Tubes fit over the release button.
The Mini Attachments push tightly over just the front portion of the Handle or Extension Tube.
8
HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM
PREPARING YOUR STEAM CADDY FOR USE