Earlex IS2000 Vacuum Cleaner User Manual


 
12
HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM
The Scraper Nozzle is ideal for very fast defrosting of freezers (check with freezer manufacturer), also
for jobs such as removing the caked on grass from lawnmowers. Remember that steam both cleans
and sanitises at the same time. So on work surfaces you are ensuring these are really clean.
As an optional extra (Code M0605) we offer a pack
of 3 spare brushes each with different coloured
bristles so you can keep these for separate jobs
and always know which one to use.
Also available as an optional extra (Code M0630)
we offer a pack of 2 brushes with metal bristles for cleaning barbecues.
GETTING STARTED
Before you use your Earlex Steam Caddy, make sure that you have read and followed all the safety
instructions.
Decide how you want to use the Steam Caddy, as a hand held unit with the Boiler hung over your
shoulder, with the Boiler unit fixed to the Caddy free to be pulled along on the floor, or set up as a
Clothes Steamer. Refer to the section “Preparing your Steam Caddy for use” and fit together the
various parts of the system to suit the job in hand.
Filling the Water Tank (8)
The Water Tank can be filled in two ways. Remove the Steam Handle from the
Holster then either:
Lift the Water Tank Lid (7) and hold it out of the way, fill the Water Tank to the
base of the filler neck (75cl) then replace the lid.
Or
Lift Water Tank Lid and pull the Water Tank out completely. Fill this from a tap
to the base of the filler neck then replace it into the Boiler and replace the lid.
Note In hard water areas we recommend you use cooled boiled water.
The water in the tank should last for about 30 minutes but this can be refilled at
any time and does not require the unit to be switched off. Nor do you have to
wait for it to heat up again. Simply refill either in situ or at the tap and you can
continue as before.
USING THE MINI ATTACHMENTS
The 3 Mini Attachments are stored in a recess underneath the boiler, for
easy selection of the tool required. The 3 attachments supplied are:-
a) Scraper Nozzle (15)
b) Brush Nozzle (16)
c) Jet Nozzle (14)
WARNING: THESE MINI ATTACHMENTS RUN VERY HOT IN USE. When changing the Mini
Attachments, always use a cloth when holding the attachment to prevent burning your hands. Check
attachments on a regular basis for any debris/scale build up.
The Mini Attachments are ideal for cleaning cookers, baths, toilets, work surfaces, tiles, sinks etc. The
brush can be used to agitate areas that need that little bit extra abrasion. We recommend that you use
these attachments in conjunction with a damp cloth. As an example – if you have baked on material
on a cooker, aim the Jet Nozzle at the surface, press the Steam Button to release the steam and you
should be able to easily wipe the surface clean. The damp cloth enables you to wipe away the waste
material.
a
b
c