Filter
Top Products
11
Finding blockages
B
A
C
D
Check tools are clear
of blockages.
Release wand from
vacuum
A Remove wand by pressing
hose button and sliding
hose off wand. Check
inside wand and hose
for blockages.
B Press hose release button
at front of machine and
slide hose out with lower
cord hook at rear.
U bend inspection
C Tilt machine forward, slide
out U bend and check
inside for blockages.
Airway inspection
D Squeeze valve release
buttons and check inside
for blockages.
CAUTION
•Turn power off and unplug
before checking for
blockages. Failure to do so
could result in electric
shock or personal injury.
•If any part of your machine
becomes blocked, it may
overheat and then
automatically shut off.
Unplug machine and
leave to cool down.
•Please note: Clearing
blockages is not covered
by your machine’s
limited warranty, please
call the Dyson Helpline
on 1-877-397-6622.
•Beware of sharp objects
when clearing blockages.
•Refit all parts of the
machine before using it.
•If you hear a loud rachet
noise it means the
brushbar is obstructed.
•Disconnect the machine
before removing the
obstruction.
Finding blockages
DC14 wand
www.dyson.com
16832_CAN_DC14_OPS_MAN_WARR 31/5/07 13:12 Page 11