Filter
Top Products
• Remove the four
“shoulder screws” sup-
plied from the hard-
ware packet.
• Screw two of the four
shoulder screws into
the holes on the bottom
back of the fan and
two into the holes on
the bottom front of the
fan.
• Remove the mounting
bracket from the kit
provided.
• Temporarily hook the
mounting bracket over
the four screws to hold
the bracket in place
(Fig. 3).
• Choose a suitable
mounting location on
the window frame
where the fan can be
positioned to direct air-
flow through the open
window. Mark the loca-
tion of the bracket with
a pencil for placement.
NOTE: Since the mount-
ing bracket will remain
attached to the window
frame at the marked
location, be sure that
the bracket is posi -
tioned in a manner that
will allow the window
to be closed when the
fan is removed.
• Unhook the bracket
from the fan. Using the
long wood screws pro-
vided in the hardware
packet, mount the
bracket into the frame
at the marked location
(Fig 4). The fan can be
mounted onto the
bracket within the win-
dow and is ready for
use (Fig. 5).
• In rare instances dur-
ing CASEMENT win-
dow installation, your
window screen may not
fit in its original posi-
tion. In that event, it
may be necessary to
use an “alternate brack-
et” which will be pro-
vided free of charge.
This alternate bracket
will enable you to use
your window screen in
its original position.
Please refer to the
PARTS AVAILABLE sec-
tion of this instruction
manual.
C A S E M E N T O R S L I D I N G W I N D O W S
FIG. 3 FIG. 4 FIG. 5