Filter
Top Products
Your fan comes fully
assembled and ready
for installation.
Casement and sliding
windows require a
mounting bracket for
installation which can
be found in the hard-
ware packet provided.
Your window fan has
been designed to fit
double hung, casement
or sliding windows with
minimum openings of
56cm wide x 31cm
high (21
7
/
8
” x 12”).
Casement or sliding
windows require mini-
mum openings of
31cm wide x 56cm high
(12” x 21
7
/
8
” ) .
I N S TA L L AT I O N I N S T R U C T I O N S
• Identify the front and
back sides of the fan.
The back side has plas-
tic tabs at each corner.
The front side has a
“pull-out” handle near
the top center.
• Open your window
at least 28cm (11”)
high.
• For FRESH AIR oper-
ation, (draws in fresh
air from the outside),
hold the fan so the
front side faces you.
• For EXHAUST opera-
tion (pulls indoor air
out of the room), turn
the fan so the back
side faces you.
• Position the bottom of
the fan in the window
sill, making sure that
the power cord is hang-
ing inside your ro o m .
• Hold the fan in place
and lower the window
to the top of the fan.
Be sure that contact is
made with the window
guides on the top of
the fan (Fig. 1).
• To push the side pan-
els back into the fan,
pull out each plastic
tab on the back side of
the fan so that the
metal part of the pull-
out tab is hooked over
the plastic ridge (Fig. 2).
In this “pulled-out” posi-
tion you can easily
slide the side panels
back into the fan. The
tabs should then be
returned to the normal
position to secure the
side panels in place.
D O U B L E H U N G W I N D O W S
FIG. 2
FIG. 1