Filter
Top Products
ASSEMBLY
PEDESTAL AND PANELS
Pedestal Base Installation:
1. Slide the front part of the
pedestal base around the
pedestal and fix the rear
part with the two supplied
screws.
2. Slide the ash pan in position.
Side Panels and Ash Lip
Installation:
1. Start by fixing the front part
of the decorative side in the
two clips welded on the
sides of the fire box.
2. Then, fix the back of the
decorative side with two
screws and washers
supplied. Line up the
decorative side parallel to
the side of the appliance.
3. Clip the ash lip into position,
centred just below the door.
4