Drolet 36C03U TYPE 139 Indoor Fireplace User Manual


 
BURNER REMOVAL AND INSTALLATION :
REMOVAL :
1. Slide the burner to the left and pull toward you.
2. To gain access to the fan, also remove the firebox bottom plate.
INSTALLATION :
1. Put the bottom plate back in place.
2. Put the burner assembly back in the firebox and push to the right until it touches
the firebox side. Make sure the main orifice is inserted in the venturi tube by
looking through the square hole as shown. A silicone washer insures air tightness
between the two parts.
WARNING : NEVER OPERATE THE GAS INSERT WITHOUT HAVING THE
ORIFICE PROPERLY INSERTED EN THE VENTURI TUBE. THIS WOULD
RESULT IN SERIOUS DAMAGE TO THE GAS INSERT AND IS A SERIOUS
RISK OF FIRE.
12