Filter
Top Products
AIR TUBES INSTALLATION (SIBERIAN 2000):
The secondary air tubes are painted different colours . The back tube is yellow, the middle
one is red and the front is unpainted. Before installing, make sure the locating holes in the
tubes (holes near one end of the tube) are on the left side. Insert one tube in the right side
air channel and slide it to the right as much as possible. Bring the left end of the tube
aligned with the ring welded to the left air channel. Move the tube to the left until the
locating holes are aligned with those in the ring. Insert a cutter pin to hold in place. The air
injection holes should be facing down in the front and middle tubes.
Figure 6: Air Tubes Installation
8