Filter
Top Products
ENGLISH
Peterbilt 379 Installation Guidelines
6
Figure 3a - Control/Display panel mounted
Figure 3b -Alternative Control/Display panel mounting location
Control mounted
Control mounted
INSTALLING THE CONTROL
Installing the Control/Display Panel
Mount the control in such a location as to give the
driver good access. The suggested location would be
near the current HVAC controls, however, that may be
very tough on some models (Figs. 3a-3b). Route the
CXP cable through the wall or cabinet and into the
luggage compartment, then to the rear of the bunk for
later connection.