Filter
Top Products
4
Inside Temperature
Press and hold the INSIDE TEMP button and the LCD will display the current inside
temperature recorded at the CCC 2 Thermostat (or at the optional remote indoor
temperature sensor) instead of the temperature set-point. The LCD will also display
“IN” to indicate that the inside temperature is being displayed. When the INSIDE
TEMP button is released, the LCD will return to the programmed temperature set-
point.
Outside Temperature
Press and hold the OUTSIDE TEMP button and the LCD will display the current
outside temperature recorded at the outdoor temperature sensor in place of the tem-
perature set-point. The LCD will also display “OUT” to indicate the outside tempera-
ture is being displayed. When the OUTSIDE TEMP button is released, the LCD will
return to the programmed temperature set-point.
Clock Setting
Press the CLOCK button to initiate the clock setting sub-menu on the CCC 2 ther-
mostat. When in this menu, the hour digits will ash rst. The hour can be adjusted
using the or buttons. Press the CLOCK button again and the minute digits
will ash, allowing the minute setting to be adjusted using the or buttons.
Press it a third time and the AM or PM icon will ash, allowing the AM or PM setting
to be adjusted using the or buttons. Press it one more time to store the new
time in memory and exit the clock setting sub-menu.
Temperature format ºF / ºC
Press the ºF / ºC button to switch between Fahrenheit and Centigrade format. ºF
indicates Fahrenheit and ºC indicates Centigrade