D-Link DCS-6010L Home Security System User Manual


 
57D-Link DCS-6010L User Manual
Section 4: Conguration
Event Setup
In a typical application, when motion is detected, the DCS-6010L sends images to a FTP server or via e-mail as notications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a specied action will be
performed. You can congure the Network Camera to send snapshots or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action shall be
performed when a trigger is activated.